Ranco - Aquastat / Electronic Temperature Controller

Title:
Ranco - 24V Aquastat / Electronic Temp Controller (112000-000)
Images
Ranco - Aquastat / Electronic Temperature Controllers
Ranco - Aquastat / Electronic Temperature ControllersRanco - Aquastat / Electronic Temperature ControllersRanco - Aquastat / Electronic Temperature ControllersRanco - Aquastat / Electronic Temperature Controllers
Price: 
$74.95
SKU:
112000-000
Product Dimensions: 
2.48 × 2.7 × 6.52 in
Product Weight: 
1.2 lb
Product Family: 

Description 

The Ranco ETC is a microprocessor-based family of temperature controls designed to provide on/off control for commercial heating, cooling, air conditioning and refrigeration applications. With its wide temperature range, one and two stage capability, selectable heating/cooling modes and multi-voltage input, the ETC is one of the most versatile temperature controls available.

DIGITAL DISPLAY

Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1° resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display. When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized.

CHOICE OF ONE OR TWO STAGE MODELS

The ETC line includes both one and two stage models. On two stage controls, each stage can be set independently thus eliminating the bothersome task of calculating interstage temperatures. And two stage models can be set up with overlapping heating or cooling stages.

REMOTE TEMPERATURE SENSING

The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire.

BUILT-IN SAFETY

Every ETC model is equipped with diagnostic programs that check for hardware, software or system problems and display different error codes to indicate where the trouble is. The ETC also has a keypad lockout switch to prevent tampering with the control settings by unauthorized personnel. The switch, which is located inside the enclosure, can be used to disable the keypad function.

OPTIONAL ANALOG OUTPUT

Some ETC models are available with a 0 to 10 volt analog output that can be used for remote temperature indication or as input to a central monitoring system. This signal is a linear representation of the sensor temperature with 0 volt –30°F and 10 volts = 220°F.

Specifications 

  • Model: 112000-000
  • Single Stage
  • Encloser: NEMA 1
  • Input Power Reqruirement: 24V AC
  • Setpoint Range: -30° to 220°F
  • Sensor Thermistor: 2" long x 1/4" dia. with 8' cable
  • Control Ambient Temp range: -20°F to 140°F
  • Ambient Humidity: 0 to 95% RH (Non-condensing Enclosure)
  • Impedance: 1K Ohms
  • Certifications: UL, CSA,
  • Switch Type: Single Pole Double Throw (SPDT)

Manufacturer 

Recent Products