ChillX - 10-20 Ton Process Chillers (Dual-circuit)

ChillX - 15 Ton Process Chiller (Dual Circuit) (208/230V 3-Phase)
ChillX - 10-20 Ton Process Chillers (Dual-circuit)

Product Dimensions: 
88.75 × 60.125 × 48.75 in
815 lb
Operating Temp: 
Regular Temp (55F LWT)
Product Family: 
Product Certifications: 

Description & Overview 

Our larger, dual-circuit 10-20 Ton process chiller line are an excellent budget-friendly choice for applications requiring a modular, scalable design. These units are also frequently used to replace antiquated chillers where existing buffer tank and distribution components are still operational and the customer prefers to simply replace the chiller portion. This new process chiller module can simply be added to the existing tank system to augment or replace the existing chiller capacity.

These dual-circuit process chillers are available from 10-20 Ton. The secondary circuit can provide the performance advantages of a two-stage system, and/or serve as back-up capacity for the primary circuit.


Because these chillers have no built-in reservoir, either a brazed-plate [standard] or tube and shell [option] heat exchanger is used for the evaporator. These models do not come with our "no-freeze" evaporator.


We use nothing but ETL & UL approved components. These larger process chiller designs can be built for: 208/230V 3-Phase, 460V 3-Phase, and 575V 3-Phase. Each process chiller includes built-in temperature control which utilizes the very dependable and versatile RANCO controller. Please inquire if you need something more custom or have questions about any of the listed features and upgrade options.


ChillX Chillers are built using only the best refrigeration circuit components -- no expense has been spared to ensure many years of efficient, and dependable service. Our standard chiller designs use readily available off-the-shelf components, for easier maintenance and serviceability.


  • Direct drive fan motors
  • High-capacity driers
  • High-pressure switch
  • Loss of charge switch
  • Exterior refrigerant service valves
  • Low ambient start to 0F
  • Heavy gauge pre-painted steel cabinet
  • Built-in two-stage thermostatic control
  • Warranty: 5 year limited compressor, 1 year limited for remaining covered parts

Options / Upgrades

  • Low Temp upgrade (25-28F LWT)
  • Hot Gas Recovery: Secondary condensor to capture otherwise rejected heat, commonly used to augment de-humidification applications.
  • Tube & shell heat exchangers options available for augmented freeze protection
  • Heat pump upgrade
  • Hail guards
  • Controller cord extension upgrade

Installation Notes

Please note, process chiller designs do not include a built-in reservoir or circulation pump. So, depending on your situation, you may need to acquire and install a buffer tank and distribution system. This most commonly includes: (1) buffer tank, (1) dedicated chiller circulation pump, (1) process circulation pump, and some sort of chilled water distribution manifold and controller system. We're happy to help advise on those components regardless if we supply them, please just let us know if we might help.


  • 180,000 BTU/HR at 90F degree ambient and 50F degree water out
  • (2) Copeland scroll compressor
  • (2) Stainless Steel Brazed Plate Evaporators (Standard)
  • R410a Refrigerant
  • Electrical: 208/230V, 60hz three phase
  • Minimum Circuit Ampacity: 63, Maximum Fuse Size 80 Amps
  • Flow switch safety
  • Low ambient start kit of 0F (standard)
  • Approximate shipping weight 860 LBS
  • Dimensions: 61" wide, 89" long, 49" tall
  • ETL Laboratory Approved
  • Decibels: 88

Product Manufacturer 

ChillX Chillers

ChillX Premium Water Chillers

ChillX premium water chillers are built using the highest quality components, including stainless steel reservoir, 1/2" foam insulation, and custom refrigeration evaporators manufactured in-house. Every ChillX water chiller is load tested and must produce at least 110% of the BTU rating for that system -- guaranteed! Our custom evaporators are as much as 20% more efficient than any other chiller on the market today!

A great deal of research, engineering, and creativity goes into every product offered by ChillX. Built in the USA by expert craftsman, ChillX chillers are custom designed by a team of engineers with decades of experience in all manner of commercial refrigeration applications. You won't find a more thoughtfully considered chiller solution anywhere else.

CHILLX Premium Water Chillers

The Most Efficient cooling solutions
For Your Environment.

Request A Quote

We Offer FREE Design Assistance!

Need help sizing your project? Need some grow room design ideas or chiller configurations for brewery or winery applications? Not sure where to start? Well, we can help! Please provide a few details and one of our design engineers will reach out soon to discuss your project.

Related Items

ChillX - 16 to 110 Ton Dual Circuit Process Chillers (Semi-Hermetic)
EcoPlus - Budget Fractional Process Chillers
ChillX - 2 - 10 Ton Modular Water Cooled Chiller Cubes
ChillX - 1.5-10 Ton Commercial Process Chillers With-out Reservoir