Beer Brewing & Wineries

Our Compact Low Temp (LT) chillers are ideal for the budget-minded user and too little space for larger equipment. These very efficient mobile chillers can be used at a wide range of operating temps (from 60F all the way down to 25F!) and are just as happy indoors as outdoors. These units spare no features and even come standard with caster wheels for easy mobility and a performance optimized microcontroller which makes efficient operation at very low temps possible. These units are packed with features and a great price too!

Liquidus Pumps represent our value line of circulating pumps with very similar design and performance specs to better known equivalents like Taco, B&G, and Grundfos. These pumps are suitable for most low pressure heating and cooling applications using water or glycol mixes. This design is most commonly used with boiler and radiant floor applications.

B&G's NRF-22 flanged in-line system lubricated circulating pump was designed specifically for quiet operation in closed hydronic heating and cooling systems. The B&G NRF-22 pump is the only oil lubricated pump on the market; other pumps use water and water does not a good lubricant make!

This pump is approximately 30% more powerful than the Taco 007 size.

The Ranco ETC is a microprocessor-based family of temperature controls designed to provide on/off control for commercial heating, cooling, air conditioning and refrigeration applications. With its wide temperature range, one and two stage capability, selectable heating/cooling modes and multi-voltage input, the ETC is one of the most versatile temperature controls available.

B&G's NRF-22 flanged in-line system lubricated circulating pump was designed specifically for quiet operation in closed hydronic heating and cooling systems. The B&G NRF-22 pump is the only oil lubricated pump on the market; other pumps use water and water does not a good lubricant make!

This pump is approximately 30% more powerful than the Taco 007 size.

The VU844 Valve Actuators, and VU52, VU53 and VU54 Valve Bodies, will control hot or chilled water in commercial HVAC equipment such as fan coil units, terminal reheat coils and convectors. These valves are humidity resistant and are suitable for use in condensing, non-corrosive environments.

Our Port-All Manifolds provide an amazing value that's hard to beat! These manifolds are come standard with generously large Supply & Return ports, 1/2" PEX quick connect circuit ports, gauges to monitor temp and pressure, both circuit level and system level valves for maximum control and ease of maintenance, air vent, and fill/drain ports. It's never been easier to multi-task your water chiller to provide cooling to multiple heat exchangers and achieve climate control in multiple spaces!

Our line of shell and tube heat exchangers come in a wide range of cooling capacities, from 1 Ton to 100 Ton. These units are sized specifically for our ChillX and Chillking line of water chillers, and provide the best combination of affordability, reliability, and efficiency. Among the most important differentiators of these shell and tube heat exchangers, include: all-stainless welded construction, helix tubing, and large ports for maximum flow.

Just like our line of stainless steel shell and tube heat exchangers our titanium models also come in a wide range of cooling capacities from 1 Ton to 25 Ton, and heating capacities from 4 to 375 Ton! Our titanium heat exchangers are fully constructed with titanium shell and corrugated titanium interior tubes, ensuring adequate turbulence and avoiding inefficient laminar flows. These heat exchangers are sized and optimized specifically for our ChillX and Chillking line of glycol chillers, and offer the best available corrosion resistance for greatest longevity.

These inline/process chillers are available from 2 - 10 ton and offer a compelling cooling solution unique to the industry. Models without a cabinet do not have a reservoir or pump while models with 12" cabinet include a built-in pump but no reservoir. Accordingly, if you choose a unit with-out cabinet you'll need to supply an outside pump source and your own reservoir. Units with cabinet will still require an outside reservoir.