ChillX - 4 & 5 Ton Horizontal Chillers

ChillX - 4 Ton Low Temp Horizontal RTU-style Chiller (208/230V 1-Phase)
ChillX - 4 & 5 Ton Horizontal Chillers (By Chillking)
ChillX - 4 & 5 Ton Horizontal Chillers (By Chillking)ChillX - 4 & 5 Ton Horizontal Chillers (By Chillking)
Product Dimensions: 
74.25 × 48.25 × 38.75 in
750 lb
Product Certifications: 


CHILLX CHILLERS: Custom, Horizontal (RTU-style), and Vertical configurations are available from 1/2 to 100 tons. An auto fill mechanism is available on all models with tanks. Water distribution manifolds can be constructed to meet your exact needs. Our innovative distribution water manifold drastically reduces the normal manifold footprint. Our innovative manifold designs fit in a cabinet 30"W X 19"H X 12"D. In most cases up to ten pieces of equipment can be run on this manifold system.

Evaporator In Tank

Units equipped with the stainless steel tank have our generously sized "No-freeze" immersion coil evaporator in-tank. Our unique design maximizes the refrigeration circuit and flows the water around the evaporator to attain maximum heat exchange.


ChillX uses nothing but UL approved components. Our systems can be built for 208/230V single-phase or three-phase, or 460/480V three-phase. 575V-600V and other uncommon power supply options may also be available upon request. By default, temperature control is managed by the tried and true RANCO Aquastat controller. This controller unit can be wired 24V, 120V, or 240V. Many other chiller options are also available.


ChillX Chillers uses only the best of components in our refrigeration systems. Horizontal, Vertical and Remote chillers have Copeland scroll compressors with a suction filter and liquid dryer to ensure many years of dependable service.


  • 52,800 BTU/HR at 55F LWT and 90F ambient
  • 23,000 BTU/HR at 28F LWT and 90F ambient
  • Electrical: 208/230V, 60hz single phase
  • Minimum Circuit Ampacity: 34, Maximum Fuse Size 53 Amps
  • One 50 gallon insulated stainless steel tank
  • 1 HP water pump: 47 GPM max, 49 PSI max
  • R410a Refrigerant
  • (1) Copeland scroll compressor
  • Approximate shipping weight 800 LBS
  • Dimensions: 48-1/4" wide, 74-1/4" long, 38-3/4" tall
  • Decibels: 78


ChillX Chillers

ChillX Premium Water Chillers

ChillX premium water chillers are built using the highest quality components, including stainless steel reservoir, 1/2" foam insulation, and custom refrigeration evaporators manufactured in-house. Every ChillX water chiller is load tested and must produce at least 110% of the BTU rating for that system -- guaranteed! Our custom evaporators are as much as 20% more efficient than any other chiller on the market today!

A great deal of research, engineering, and creativity goes into every product offered by ChillX. Built in the USA by expert craftsman, ChillX chillers are custom designed by a team of engineers with decades of experience in all manner of commercial refrigeration applications. You won't find a more thoughtfully considered chiller solution anywhere else.

CHILLX Premium Water Chillers

The Most Efficient cooling solutions
For Your Environment.

Related Items

ChillX - 16 to 110 Ton Dual Circuit Process Chillers (Semi-Hermetic)
ChillX - 20 - 40 Ton Vertical Self-Contained Quad-Circuit Chillers
ChillX - 15 - 30 Ton Vertical Self-Contained Chiller
ChillX - 1.5 - 12 Ton Vertical Extra Low Temp Chillers
ChillX - 1/4 - 1 Ton Compact Low Temp Chillers W/ Res
ChillX - 1.5 - 10 Ton Compact Commercial Extra Low Temp Chillers
ChillX - 15-25 Ton Horizontal Dual Circuit Chillers
ChillX - 7.5-12.5 Ton Horizontal Dual Circuit Chillers
ChillX - 2-5 Ton Low Profile Low Temp Self-Contained Chillers (Single Circuit Models)ChillX - 2-5 Ton Low Profile Low Temp Self-Contained Chillers (Single Circuit Models)
ChillX - 2-10 Ton Vertical Chillers (Single Compressor)
ChillX - 6 Ton Horizontal Chillers
ChillX - 1.5-10 Ton Commercial Process Chillers With-out Reservoir
ChillX - 2 & 3 Ton Horizontal RTU-Style Chillers